주요특징
| GL-9012 (DeviceNet Network Adapter Light) Communication Interface Specification |
||
|
Model Type |
GL-9012 | |
| Adapter Type | Group 2 Only Slave | |
| Max. Expansion Slot | 10 Slots | |
| I/O Data Size | Max Input 36 bytes / Max Output 36 bytes | |
| Max. Length Bus Line | Max.100m@500Kbps, Max. 250m@250Kbps, Max. 500m@125Kbps | |
| Max. Network Node | 64 Nodes | |
| Baud Rate | 125Kbps(Max. 500m) 250Kbps(Max. 250m) 500Kbps(Max. 100m) Auto Baud Supported |
|
| Protocol | Poll, Bit-Strobe, Cyclic, COS | |
| Node MAC ID Setup | DIP Switch | |
| Terminating Resistance Setup | DIP Switch | |
| Bus Connection | 5 Pin Open-Style Connector | |
| Indicator | 4 Status LED 1 Green/Red, Module Status (MOD) 1 Green/Red, Network Status (NET) 1 Green, Terminating Resistance Status (TER) 1 Green/Red, Expansion I/O Module Status (IOS) |
|
| Module Location | Starter module left side of G-Series system | |
| General Specification | ||
| UL System Power | Supply voltage : 24Vdc nominal, Class2 | |
| System Power |
Supply voltage : 24Vdc nominal |
|
| Power Dissipation | Max. 20mA @ 24Vdc | |
| Current for I/O Module | 1.0A @ 5Vdc | |
| Isolation | System power to internal logic : Non-Isolation System power I/O driver : Isolation |
|
| UL System Power | Supply voltage : 24Vdc nominal, Class2 | |
| Field Power | Supply voltage : 24Vdc typical (Max. 28.8Vdc) * Field Power Range is different depending on IO Module series. Refer to IO Module’s Specification. |
|
| Max. Current Field Power Contact | DC 8A Max | |
| Wiring | I/O Cable Max. 2.0mm2(AWG 14) | |
| Torque | 0.8Nm(7 lb-in) | |
| Weight | 67g | |
| Module Size | 22mm x 109mm x 70mm | |