주요특징
- 통신 이중화 듀얼타입 네트워크 어댑터를 통해 “Active – Standby “ 방식으로 통신 이중화 구현 , Active 모듈 문제 발생 시 , Standby 모듈이 즉시 동작하여 안정적인 통신을 유지 가능
- 파워 이중화 전원 문제 발생 시 외부 노이즈로부터 통신, 네트워크를 보호하고 전원 문제 시 발생할 수 있는 손실을 방지
- 핫스왑 Backbone 구조로 인해 전원이 인가된 상태에서도 모듈 착탈이 가능하며, 유지보수 시에도 설비 멈춤없이 안정적 유지 보수 및 교체 가능
| M5914(4ch 4-20mA with HART Module) | |
| Analog Input | |
Number of Channel |
4 Channels single ended, non-isolated between channels |
| Indicators | 4 Green & 4 Red Input status |
| Resolution in Ranges | 16 bits (Include Sign) 15 bits : 0.49uA/Bit(4~20mA) |
| Module Error | ±0.1% Full Scale @ 25℃ ambient ±0.3% Full Scale @ -25℃, 60℃ |
| Input Impedance | 16bits Integer (2' compliment) |
| Module Error | ±0.1% Full Scale @ 25℃ ambient ±0.3% Full Scale @ -25℃~60℃ |
| Input Impedance | 270Ω |
| Conversion Time | 30msec / All channel |
| Field calibration | Not Required |
| Commons Type | 4 Common, Field Power 0V is Common(AGND) |
| HART Specification | |
| HART Version | Revision 5 |
| Open circuit detection | Imeas < 3.5mA |
| Short circuit detection | Imeas > 22mA |
| General specification | |
| Power dissipation | Max. 30mA @ 5.0Vdc |
| Isolation | I/O to Logic : Isolation |
| UL Field Power | Supply voltage : 24Vdc nominal, Class 2 |
| Field Power | Supply voltage : 24Vdc nominal Voltage range : 18~28.8Vdc, Power Dissipation : Max. 10mA @ 24Vdc |
| Single Wire | 0.205㎟ - 1.3㎟ (24-16 AWG) |
| Torque | 0.8Nm(7 lb-in) |
| Weight | 72g |
| Module Size | 12mm x 110mm x 75mm |
| Hot Swap | Possible |
| Pin No. | Signal Description |
| 0 | HART0 + |
| 1 | HART0 - |
| 2 | ANGD |
| 3 | F.G |
| 4 | HART1 + |
| 5 | HART1 - |
| 6 | ANGD |
| 7 | F.G |
| 8 | HART2 + |
| 9 | HART2 - |
| 10 | ANGD |
| 11 | F.G |
| 12 | HART3 + |
| 13 | HART3 - |
| 14 | ANGD |
| 15 | F.G |
| 16 | N.C |
| 17 | N.C |