주요특징
- 통신 이중화 듀얼타입 네트워크 어댑터를 통해 “Active – Standby “ 방식으로 통신 이중화 구현 , Active 모듈 문제 발생 시 , Standby 모듈이 즉시 동작하여 안정적인 통신을 유지 가능
- 파워 이중화 전원 문제 발생 시 외부 노이즈로부터 통신, 네트워크를 보호하고 전원 문제 시 발생할 수 있는 손실을 방지
- 핫스왑 Backbone 구조로 인해 전원이 인가된 상태에서도 모듈 착탈이 가능하며, 유지보수 시에도 설비 멈춤없이 안정적 유지 보수 및 교체 가능
| M4118 (8 Channels Current Output, 0~20mA, 12Bit) | |
Outputs per module |
8 Channels single ended |
| Indicators(Logic side ) | 8 Green Output status |
| Resolution in Ranges | 12 bits : 4.88uA/Bit |
| Output Range | 0~20mA |
| Data Format | 16bits Integer (2' compliment) |
| Module Error | ±0.1% Full Scale @ 25℃ ambient ±0.3% Full Scale @ -25℃~60℃ |
| Load Resistance | <200Ω |
| Dignostic | Field Power Off : Led Blinking Field Power On : Led ON |
| Conversion Time | Max. 250usec / All channel |
| Calibration | Not Required |
| Commons Type | 8 Common, Field Power 0V is Common(AGND) |
| General specification | |
| Power dissipation | Max. 30mA @ 5.0Vdc |
| Isolation | I/O to Logic : Photocoupler Isolation Field power : Non-Isolation |
| UL Field Power | Supply voltage : 24Vdc nominal, Class 2 |
| Field Power | Supply voltage : 24Vdc Norminal Voltage range : 18V ~ 28.8Vdc Power dissipation : 130mA @ 24Vdc |
| Single Wire | 0.205㎟ - 1.3㎟ (24-16 AWG) |
| Torque | 0.8Nm(7 lb-in) |
| Weight | 72g |
| Module Size | 12mm x 110mm x 75mm |
| Hot Swap | Possible |
| Pin No. | Signal Description |
| 0 | Output Channel 0 |
| 1 | Common(AGND) |
| 2 | Output Channel 1 |
| 3 | Common(AGND) |
| 4 | Output Channel 2 |
| 5 | Common(AGND) |
| 6 | Output Channel 3 |
| 7 | Common(AGND) |
| 8 | Output Channel 4 |
| 9 | Common(AGND) |
| 10 | Output Channel 5 |
| 11 | Common(AGND) |
| 12 | Output Channel 6 |
| 13 | Common(AGND) |
| 14 | Output Channel 7 |
| 15 | Common(AGND) |
| 16 | F.G |
| 17 | F.G |