crevis

M9222

PROFIBUS Network Adapter


제품비교 담기

도움이 필요하세요?

샘플요청 견적문의
썸네일이미지 원본

주요특징


- 통신 이중화 듀얼타입 네트워크 어댑터를 통해 “Active – Standby “ 방식으로 통신 이중화 구현 , Active 모듈 문제 발생 시 , Standby 모듈이 즉시 동작하여 안정적인 통신을 유지 가능

- 파워 이중화 전원 문제 발생 시 외부 노이즈로부터 통신, 네트워크를 보호하고 전원 문제 시 발생할 수 있는 손실을 방지

 - 핫스왑 Backbone 구조로 인해 전원이 인가된 상태에서도 모듈 착탈이 가능하며, 유지보수 시에도 설비 멈춤없이 안정적 유지 보수 및 교체 가능
M9222 (Profibus NETWORK ADAPTER)

Repeater Control Signal

RS-485 Signal
Freeze mode Support
Sync mode Support
Auto baudrate Support
Station type Slave
FMS support Not supported
Max. Network Node 125 Nodes
Max. Expansion Slot 63 Slots
I/O Data Size Input : 244bytes / Output : 244bytes
Indicators 4 LEDs
1 Green/Red, Module Status (MOD)
1 Green, Receive Data (NET)
1 Green, Transmit Data (DIA)
1 Green/Red, Expansion I/O Module Status (IOS)
Communication Rate 9.6K ~ 12M (1.2Km~100m)
Communication Speed 9.6 ~ 12000 Kbps (Auto baudrate selection)
Bus Connection 9 Pin D-Sub Connector
Module Location Starter module left side of M-Series system
Field Power Detection About 15Vdc
General specification (Supplied by M7001)
UL System Power

Supply voltage : 24Vdc nominal, Class 2

System Power Supply voltage : 24Vdc nominal
Supply voltage range : 15~28.8Vdc
Protection : Output current limit, Reverse polarity protection
Power Dissipation 80mA typical @ 24Vdc
Current for I/O Module 2.0A @ 5Vdc
(If except for NA, current for I/O module is about 1.7A)
Isolation System power to internal logic : Non-isolation
System power I/O driver : Isolation
UL Field Power Supply voltage : 24Vdc nominal, Class 2
Field Power Supply voltage : 24Vdc typical (Max. 28.8Vdc)
* Field Power Range is different depending on IO Module series.
Refer to IO Module`s Specification.
Max. Current Field Power Contact DC 10A Max
Single Wire 0.205㎟ - 1.3㎟ (24-16 AWG)
Torque 0.8Nm(7 lb-in)
Weight 179g
Module Size 54mm x 110mm x 75mm

NEWSLETTER

국내유일의 필드버스 전문회사 크래비스의 새로운 소식을 받아보세요!

뉴스레터 신청하기