CREVIS

주요특징

- 다양한 산업용 프로토콜 (MODBUS TCP , EtherNet IP , PROFINET , EtherCAT , CC-Link IE , CC-Link IE Field Basic , DeviceNet , PROFIBUS , MODBUS RS485, CC-Link , CanOpen , BACnet ,MODBUS RTU) 제공

- 90종 이상 다양한 IO 모듈 구성 및 제공 (유니버셜 타입의 디지털 입력 모듈, 국내 최초 32 Points 슬라이스 I/O 모듈 , ERNI타입 커넥터 입출력 모듈)

- 컴팩트한 사이즈와 슬라이스 모듈 확장 방식으로 효율적인 공간 활용

- 사용자 편의를 고려한 Removable Terminal Block 방식 제공으로 전장 배선 및 설치 시 작업자에 쉽고 편리한 작업 환경 제공

GN-9481/9482/9483 (G-Series EtherCAT PROGRAMMABLE I/O)
Programming		CoDeSys V3.5.11.3
Program Memory	GN-9481 *	512 KBytes
	GN-9482/9483	16 MBytes
Data Memory	GN-9481	96 KBytes	IO Input: %IW0 ~%IW2047 (2048 words) IO Output: %QW0 ~%QW2047 (2048 words) Memory: %MW0 ~ %MW8191 (8192 words)
	GN-9482/9483	16 MBytes
Non-Volatile Memory	GN-9481	4 KBytes (Retain : 2 KBytes, Flag : 2 KBytes)
	GN-9482/9483	32 KBytes (Retain : 16KBytes, Flag : 16 KBytes)
Run-Time System		Multiple PLC Tasks
Program Languages		IEC 61131-3 (LD, IL, ST, FBD, SFC)
OPC-Server (DA)	GN-9481	Not supporting
	GN-9482/9483	Supporting
OPC-Server (UA)	GN-9481	Not supporting
	GN-9482/9483	Supporting (Input : 4KBytes / Output : 4KBytes)
Online Change	GN-9481	Not supporting
	GN-9482/9483	Supporting
Source Upload/Download	GN-9481	Not supporting
	GN-9482/9483	Supporting
File transmit	GN-9481	Not supporting
	GN-9482/9483	Supporting
Breakpoint	GN-9481	Not supporting
	GN-9482/9483	Supporting
Webvisualization	GN-9481/9482	Not supporting
	GN-9483	Supporting
RTC	GN-9481	Retain Time : < 15 day	Accuracy : < 2min/month
	GN-9482/9483	Retain Time : < 15 day
Max. Task		10
Max. Cycle Task		10
Max. Status Task		10
Process Time	GN-9481	1usec (90 Instructions)
	GN-9482/9483	7usec (90 Instructions)
Interface Specification
Ethernet
Adapter Type		Master & Slave Node (Modbus TCP)
Baud rate		10/100Mbps, Auto-negotiation, Full Duplex
Interface		RJ-45 socket * 1pcs
Ethernet Protocol**		Modbus/TCP, Modbus/UDP, SNTP HTTP (Webvisualization***, Web-Server), DHCP/BOOTP, OPC-server
Max. Nodes		Limited by Ethernet Specification
Max. Socket		24 (UDP: 8, TCP: 16, TCP_LISTEN: 10)
Weight		162g
Module Size		54mm x 99mm x 70mm
EtherCAT
Adapter Type		Slave Node
Baud rate		100Mbps
Interface		RJ-45 socket * 2pcs
Max. PDO	RxPDO	64 ea
	TxPDO	64 ea
Max. Size	Moduler	The maximum size is adjusted according to the IO size.
	Non-Moduler	256 bytes.
EtherCAT Protocol		EtherCAT Slave
Max. Network Nodes		65,535
Common
Max. Expansion Module		63 Slots
Max. Data Size(Input+Output)		Max 128Byte each slo
Serial Interface		RS232/RS485 2port (supporting Touch Pannel)
Serial Protocol		Modbus RTU / Baud Rate : 2400~115200 bps (Default: 115200 bps)
Indicator		6 LEDs 1 Green/Red, Module Status (MOD) 1 Green/Red, Network Status (NET) 1 Green/Red, PLC Run/Stop Status (RUN) 1 Green/Red, Expansion I/O Module Status (I/O) 1 Green, System Power Status 1 Green, Field Power Status
General specification
UL System Power		Supply voltage : 24Vdc nominal, Class 2
System Power		Supply voltage : 24Vdc nominal Supply voltage range : 15~30Vdc Protection : Output current limit (Min. 1.5A) / Reverse polarity protection
Power Dissipation		75mA typical @ 24Vdc
Current for I/O Module		1.5A @ 5Vdc
Isolation		System power to internal logic : Non-isolation System power I/O driver : Isolation
UL Field Power		Supply voltage : 24Vdc nominal, Class 2
Field Power		Supply voltage : 24Vdc typical (Max. 30Vdc) * Field Power Range is different depending on IO Module series. Refer to IO Module`s Specification.
Max. Current Field Power Contact		DC 10A Max
Weight		<167g
Wiring		I/O Cable Max. 2.0mm2(AWG 14)
Torque		0.8 Nm(7 lb-in)
Module Size		54mm x 99mm x 70mm

GN-9483

EtherCAT Slave PROGRAMMABLE I/O

주요특징

NEWSLETTER