BACnet/IP Network Adapter

제품비교 담기

도움이 필요하세요?

샘플요청 견적문의
썸네일이미지 원본


Interface Specification, GN-9251 (BACnet/IP Network Adapter)

Adapter Type

Slave node (BACnet/IP)
BACnet Device Profile BACnet Application Specific Controller (B-ASC)
Max. Supported Object Size 256 objects  (IO channels only)*
BACnet Protocol Version 1
BACnet Protocol Revision 12
Max. Expantsion Module 32 slots
Max Length Bus Line Up to 100m from Ethernet Hub/Switch with twisted CAT5 UTP/STP
Max. Nodes Limited by Ethernet Specification.
Baud Rate 10/100Mbps, Auto-negotiation, Full duplex
Interface Connector RJ-45 socket * 2pcs
IP-Address Setup Via DHCP/BOOTP or IOGuide(Crevis Software)
IP-Address Range ~ 253
IAP Mode

Set dip sw to 254.

 - IAP web-server IP:

 - Using only Internet Explorer / recommended version 11
Serial Port RS232 for MODBUS/RTU, Touch Pannel or IOGuide
Serial Configuration (RS232) 1 Node, 115200 baud, 8 data bits, no parity, 1 stop bit (Fixed)
*Refer to ‘2.3. LED Indicator’

6 LEDs - Window Lable

MOD, LINK, ACTIVE, IOS, System Power, Field Power

2 LEDs - each RJ45 Connector

Yellow(Link/Active), Green(Not used)
Module Location About 14Vdc
General Specification
UL System Power Supply voltage : 24Vdc nominal, Class2
System Power Supply voltage : 24Vdc nominal
Supply voltage range : 15~30Vdc
Protection : Output current limit (Min. 1.5A) - Reverse polarity protection
Power Dissipation

70mA typical @ 24Vdc

Current for I/O Module

1.5A @ 5Vdc**

UL Field Power Supply voltage : 24Vdc nominal, Class2
Isolation System power to internal logic : Non-isolation
System power I/O driver : Isolation
Field Power

Supply voltage : 24Vdc typical (Max. 30Vdc) ***

Max. Current Field Power Contact DC 10A Max
Weight 162g
Module Size 54mm x 99mm x 70mm


국내유일의 필드버스 전문회사 크래비스의 새로운 소식을 받아보세요!

뉴스레터 신청하기