제품비교 담기

도움이 필요하세요?

샘플요청 견적문의
썸네일이미지 원본


- 다양한 산업용 프로토콜 (MODBUS TCP , EtherNet IP , PROFINET , EtherCAT , CC-Link IE , CC-Link IE Field Basic , DeviceNet , PROFIBUS , MODBUS RS485, CC-Link , CanOpen , BACnet ,MODBUS RTU) 제공

- 90종 이상 다양한 IO 모듈 구성 및 제공 (유니버셜 타입의 디지털 입력 모듈, 국내 최초 32 Points 슬라이스 I/O 모듈 , ERNI타입 커넥터 입출력 모듈)

- 컴팩트한 사이즈와 슬라이스 모듈 확장 방식으로 효율적인 공간 활용

- 사용자 편의를 고려한 Removable Terminal Block 방식 제공으로 전장 배선 및 설치 시 작업자에 쉽고 편리한 작업 환경 제공
Interface Specification, GL-9089   (MODBUS TCP/UDP NETWORK ADAPTER)

Adapter Type

Slave node (MODBUS/TCP,MODBUS/UDP Server)
Sub-Protocol **Ethernet/IP
Max. Expantsion Module

16 slots

Max. Input / Output Data Size Max. Input 256 bytes / Output 256 bytes
Max Length Bus Line Up to 100m from Ethernet Hub/Switch with twisted CAT5 UTP/STP
Max. Nodes Limited by Ethernet Specification.
Baud Rate 100Mbps, Auto-negotiation, Full duplex
Interface Connector RJ-45 socket * 2pcs
IP-Address Setup Via DHCP/BOOTP or IOGuide(Crevis Software)
IP-Address Range ~ 253 (User area) ~ 255 (Reserved for IAP Function)
IAP Mode

When DIP Switch 1 to 8 setting is 254 or 255

(Using only Internet Explorer / recommended version 11)


4 LEDs

1 Green/Red, Module Status (MOD)

1 Green, Physical Connection (LINK)

1 Green, Exchange Data/Traffic Present (ACTIVE)

1 Green/Red, Expansion I/O Module Statsus (IOS)

2 LEDs (each RJ45 Connector)

1 Yellow, Link/Active

1 Green, Not used
Module Location Starter module left side of G-Series system
General Specification
UL System Power Supply voltage : 24Vdc nominal, Class2
System Power

Supply voltage : 24Vdc nominal

Supply voltage range : 15~28.8Vdc

Protection : Reverse polarity protection
Power Dissipation 75mA typical @ 24Vdc
Current for I/O Module 1.0A @ 5Vdc

System power to internal logic : Non-isolation
System power I/O driver : Isolation

UL Field Power Supply voltage : 24Vdc nominal, Class2
Field Power

Supply voltage : 24Vdc typical (Max. 30Vdc)

* Field Power Range is different depending on IO Module series.

Refer to IO Module`s Specification.
Max. Current Field Power Contact DC 8A Max
Wiring I/O Cable Max. 2.0㎟(AWG 14)
Torque 0.8Nm(7 lb-in)
Weight 76g
Module Size

22mm x 109mm x 70mm

Environment Condition Refer to ‘1. Environment Specification’
Pin No Signal Description
1 System Power, 24V

System Power, Ground

3 F.G
4 Field Power, Ground

Field Power, 24V


국내유일의 필드버스 전문회사 크래비스의 새로운 소식을 받아보세요!

뉴스레터 신청하기