crevis

NA-9288

EtherNet/IP Network Adapter, 252 bytes input and 252 bytes output


제품비교 담기

도움이 필요하세요?

샘플요청 견적문의
썸네일이미지 원본

주요특징


- 슬라이스 타입의 필드버스 I/O ( DeviceNet , PROFIBUS , CANopen , CC-Link , EtherCAT , MODBUS RS232 , MODBUS RS485, PROfinet , EtherNET IP, MODBUS TCP, CC-Link IE Field)

- 소형 시스템 구성에 대한 가장 합리적인 가격을 제공

- 사용자의 편의를 위한 착탈식 방식의 터미널 블럭 제공

 - Test Pin용 홀울 제공하여 배선 후에도 입출력값 확인 가능
Interface Specification, NA-9288

Adapter Type

Slave node
Max. Expansion Module 63 slots
Max. Input Size 252 bytes
Max. Output Size 252 bytes
Interface Connector RJ-45 socket * 2pcs
Max. Length Bus Line Up to 199m from Ethernet Hub/Switch
Max. Nodes Limited by Ethernet Specification
Baud Rate 10/100Mbps, Auto-negotiation, Full duplex
Protocol EtherNet/IP, HTTP, BOOTP, DHCP
IP-Address Setup Via BOOTP/DHCP, Dip Switch(Manual Function)
IP-Address range xxx.xxx.xxx.1 ~ 253 (User area)
xxx.xxx.xxx.254 ~ 255 (Reserved for IAP Function)
Other Serial Port RS232 for MODBUS/RTU(Touch Pannel, IOGuide ...)
Serial Configuration (RS232) Node : 1 (Fixed)
Baud Rate : 115200 (Fixed)
Data bit : 8 (Fixed)
Parity bit : No parity (Fixed)
Stop bit : 1 (Fixed)
Indicator 6 LEDs
1 Green/Red, Module Status (MOD)
1 Green/Red, Network Status (NET)
1 Green, Ethernet Link/ Status (LINK)
1 Green/Red, Expansion I/O Module Statsus (IOS)
1 Green, Field Power Status
2 LEDs (each RJ45 Connector)
1 Green, Link
1 Yellow, Active
Module Location Left side of S-Series system
Field Power Detection About 11Vdc
General Specification
System Power

Supply Voltage : 24Vdc nominal
Voltage Range : 11~28.8Vdc
Protection : Output Current Limit (Min 1.5A)
Reverse Polarity Protection

Power Dissipation 120mA typical @ 24Vdc
Current for I/O Module 1.5A @5Vdc
Isolation System power to internal logic : Non-isolation
System power I/O driver : Isolation
Field Power Supply voltage : 24Vdc nominal
Voltage range : 11~28.8Vdc
Max. Current Field Power Contact DC 10A Max
Weight 167g
Module Size 54mm x 99mm x 70mm

NEWSLETTER

국내유일의 필드버스 전문회사 크래비스의 새로운 소식을 받아보세요!

뉴스레터 신청하기