주요특징
- 통신 이중화 듀얼타입 네트워크 어댑터를 통해 “Active – Standby “ 방식으로 통신 이중화 구현 , Active 모듈 문제 발생 시 , Standby 모듈이 즉시 동작하여 안정적인 통신을 유지 가능
- 파워 이중화 전원 문제 발생 시 외부 노이즈로부터 통신, 네트워크를 보호하고 전원 문제 시 발생할 수 있는 손실을 방지
- 핫스왑 Backbone 구조로 인해 전원이 인가된 상태에서도 모듈 착탈이 가능하며, 유지보수 시에도 설비 멈춤없이 안정적 유지 보수 및 교체 가능
| 2.1. M5112 Specification | |
| Encoder Input Specification | |
| Number of channel |
2 Channel - High Speed Counter, Encoder with G-Signal, Frequency measurement, Pulse width & Period measurement |
| Indicators | 6 Green terminal input |
| Input voltage | 5~24Vdc nominal (Max.28.8Vdc) |
| Input current | 5~12mA @ 5~24Vdc |
| Min on-state voltage | ≥ 4.8Vdc |
| Input frequency |
Counter Mode : 0~500KHz Encoder Mode : 0~350KHz @Encoder 1x 0~750KHz @Encoder 2x, Encoder 4x |
| Counting mode* |
Counter Mode : 1-Input Mode : Up,Down, Frequency Measurement, Pulse Width & Period measurement 2-Input Mode : Up/Inhibit, Up/Reset, Down/Inhibit, Down/Reset, UP/Down,Clock/Direction Encoder Mode : 2-Input Mode : Encoder 1x, Encoder 2x, Encoder 4x |
| Counter size |
Encoder 1x : 31Bit-wide/channel Others (Mode) : 32Bit-wide/channel |
| Digital Input Specification | |
| Input per module | 2 points sink type |
| Indicators | 2 green input status |
| Input on-state voltage | 24Vdc nominal Min. 15Vdc to Max. 28.8Vdc |
| On-state current | 2.2mA @24Vdc |
| Off-state voltage | ≥ 13Vdc @25℃ |
| Input signal delay | OFF to ON : Max. 0.3ms ON to OFF : Max. 0.3ms |
| Nominal input impedance | 10.2kΩ |
| Digital Output Specification | |
| Output per module | 2 points source type |
| Indicators | 2 green output status |
| Output voltage range | 24Vdc nominal Min. 15Vdc to Max. 28.8Vdc |
| On-state voltage drop | Max. 0.5Vdc @ 25℃ |
| Off-state leakage current | Max. 20uA |
| Output signal delay | OFF to ON : Max. 0.3ms ON to OFF : Max. 0.3ms |
| Output current rating | Max. 0.3A per channel |
| Protection | Reverse voltage protection Short circuit protection |
| General Specification | |
| Power Dissipation | Max. 120mA @ 5Vdc |
| Isolation |
I/O to Logic : Photocoupler Isolation I/O to Field Power : Non-Isolation |
| UL Field Power | Supply voltage : 24Vdc nominal, Class 2 ** |
| Field Power |
Supply voltage : Class 2, 24Vdc nominal Voltage range : 15~28.8Vdc Power Dissipation : 10mA @24Vdc |
| Single Wire | 0.205㎟ - 1.3㎟ (24-16 AWG) |
| Torque | 0.8Nm(7 lb-in) |
| Weight | 72g |
| Module Size | 12mm x 110mm x 75mm |
| Hot Swap | Possible |
| Environment Condition | Refer to ‘1. Environment Specification’ |
| Pin No. | Signal Description |
| 0 | Aph Input+ Channel 0 |
| 1 | /Aph Input - Channel 0 |
| 2 | Bph Input+ Channel 0 |
| 3 | /Bph Input - Channel 0 |
| 4 | Gph Input+ Channel 0 |
| 5 | /Gph Input - Channel 0 |
| 6 | Aph Input+ Channel 1 |
| 7 | /Aph Input - Channel 1 |
| 8 | Bph Input+ Channel 1 |
| 9 | /Bph Input - Channel 1 |
| 10 | Gph Input+ Channel 1 |
| 11 | /Gph Input - Channel 1 |
| 12 | Digital Input Channel 0 |
| 13 | Digital Input Channel 1 |
| 14 | Digital Output Channel 0 |
| 15 | Digital Output Channel 1 |
| 16 | Field Power 24Vdc |
| 17 | Field Power 0Vdc (Common) |